Meyer Manufacturing | Dorchester, Wisconsin

PRODUCTS - Manure Spreaders - V-Force 7000 Series


Model 7500 V-Force

500 Bushel / 2,433 Gallons

Model 7400 V-Force

400 Bushel / 1,870 Gallons

This CUTAWAY DIAGRAM illustrates the SUPER SPREADER'S patented rear unload design.  Material is directed straight out the large back gate of the spreader by two lower augers while the upper auger runs forward to eliminate bridging.  This system requires much less horsepower and unloading time than side discharge spreaders.  And the tractor and spreader stays clean regardless of wind direction.


The rear discharge features massive 22" diameter
tilted expellers, 1/2" bolt on jaws and heavy
duty direct drive. Notice the break-away
material guides which provide maximum
spread performance and protection from
foreign objects.

Spread pattern will vary from 18'-30'
wide depending on material density.
Application rates can be reduced
by changing auger speeds.
 

FEATURES OF THE 7000 SERIES V-FORCE SPREADER


    

  • All Meyer V-Force Spreaders feature three augers constructed of massive sectional flighting. Thrust bearing and aluminum-bronze sleeves on the drive side of the auger reduce stress and horse power requirements. Steep tank sides constructed from heavy gauge, rust resistant steel are just plain heavier than the rest!
  • A "T-Post" Auger hold down system creates a larger opening for foreign objects to pass through.
  • Individual Bottom Auger Shear Hub Protection safe guards your investment and allows you to unload even with one auger obstructed. Standard feature of the 7500 V-Force Spreader (Optional on 7400 model).
  • Hardened expeller jaws are easy to replace and less expensive than pivoting hammer systems.
  • Easy Serviceability - Grease banks provide quick maintenance from ground level.
  • Auto Oiler will automatically oil your roller chains each time you operate the tailgate. Operator maintains easy access to components, unlike oil bath designs.
  • The optional Hydraulic Lid is available. The lid provides cleaner transportation and less odor pollution. right or left opening.
  • Meyer Super Spreaders can be truck mounted for fast over the road transport to your fields. Meyer units are adaptable to a wide range of trucks and also terra-gator systems. Drive options include both PTO and hydraulic.

    

  
  

Equipment Specifications
  V-Force 7400
Trailer Model
V-Force 7400
Truck Model
V-Force 7500
Trailer Model
V-Force 7500
Truck Mount
CAPACITY        
Bushels Heaped
Gallons/Cu.Ft. (struck)
Cu. yards (struck)
400
1,870 / 250
9.26 cu. yards
400
1,870 / 250
9.26 cu. yards
500
2433 / 324
12 cu. yards
500
2433 / 324
12 cu. yards
DIMENSIONS        
Overall Length 21' 9" 18' 4" plus front drive 21' 9" 18' 4" plus front drive
Inside Tank Length 15' 15' 15' 15'
Loading Height 66" w/14Lx16.1
67.5" w/16.5Lx16.1
51 1/2" plus height
of truck
76.5 w/16.5Lx16.1
78"w/19Lx16.1
60.5" plus height of truck
Overall Height-
 -Top of Splash Guard
73.25" (front) 14L
74.75 (front) 16.5L
58 1/2" (front)
plus height of truck
83.5 w/16.5Lx16.1
85"w/19Lx16.1
67.5" plus height of truck
Overall Width (outside tires) 95.75" w/14Lx16.1
102.75" w/16.5L
N/A 101.5 w/16.5Lx16.1
105"w/19Lx16.1
N/A
Top Tank Width 77 3/4" 77 3/4" 85 7/8" 85 7/8"
SPECIFICATIONS        
Total Weight 8,040# w/14L 6,540# 9,000# w/19L 7,080#
Max. Net Load (Lbs.) 16,000# 16,000# 23,000# 23,000#
Auger Diameter (lower) 20" - 3/8" sectional 20" - 3/8" sectional 20" - 3/8" sectional 20" - 3/8" sectional
Ind. Lower Auger Shear Hub Sprockets Optional Optional Standard Standard
3rd Auger (solid material) Standard Standard Standard Standard
Drive - PTO RPM 540 RPM with constant velocity  PTO Direct Std.
Hydrostatic - Opt.
540 RPM with constant velocity PTO Direct Std.
Hydrostatic - Opt.
Drive Line Protection Overrunning torque disconnect clutch Torque diconnect clutch w/shear bolt augers - PTO Overrunning torque disconnect clutch w/shear bolt augers Torque diconnect clutch w/shear bolt augers - PTO
Roller Chain Drive - augers
                                - expellers
#80 - #120
#80
#80 - #120
#80
#80 - #120
#80
#80 - #120
#80
Roller Chain Auto Oiler Standard Standard Standard Standard
Expellor Speed (RPM) 660 RPM 660 RPM 660 RPM 660 RPM
Expellor Diameter 22" 22" 22" 22"
TANK CONSTRUCTION        
Construction
Material
Copper bearing
steel
Copper bearing
steel
Copper bearing
steel
Copper bearing
steel
Thickness - Tank Sides 3/16" 3/16" 3/16" 3/16"
Thickness - Front/Back  3/16" 3/16" 3/16" 3/16"
Frame Construction Heavy 8"
channel
Heavy 8"
channel
Heavy 8"
channel
Heavy 8"
channel
Door Opening 27" x 42" 27" x 42" 27" x 42" 27" x 42"
Spindle Diameter - tandem axle 2 3/14" N/A 3" sleeved N/A
Hub 8 Bolt N/A 8 Bolt - Heavy Duty N/A
Splash Shields - front & rear Standard - flat
(low clearance)
Standard - flat
(low clearance)
Standard - angled Standard - angled
Transport Lights Standard w/ag cord Standard w/truck cord Standard w/ag cord Standard w/truck cord
Tractor Req. PTO HP (min) 85 HP   100 HP  
OPTIONS        
Lower Auger Shear Hubs Optional Optional Standard Standard
1000 RPM Kit Optional   Optional  
19" Longer Hitch
(for dual wheeled tractor)
Optional   Optional  
Hydraulic Controled Lid Optional Optional Optional Optional
Poultry Litter Package Optional Optional Optional Optional
Safety Chain Optional   Optional  
Truck Mt. Drive Options Optional PTO - Direct Std.
Hydraulic - opt.
Optional PTO - Direct Std.
Hydraulic - opt.